General Price List | January 2022 | 13 DISCOUNT GROUP 0102 Nominal flow rate Recommended filtration Pressure (bar) /flow-rate (lph) lph a 0,7 bar 0,25 0,40 0,55 0,70 0,85 1,00 0,30 200 mesh 0,19 0,24 0,28 0,32 0,36 0,39 0,40 200 mesh 0,25 0,31 0,37 0,42 0,46 0,50 0,60 155 mesh 0,37 0,46 0,54 0,60 0,66 0,71 0,90 155 mesh 0,55 0,69 0,80 0,90 1,00 1,07 1,20 155 mesh 0,75 0,92 1,07 1,20 1,32 1,41 2,10 120 mesh 1,36 1,65 1,90 2,11 2,31 2,49 Nominal Ø Inside Ø Outside Ø Wall thickness Max. working pressure mm inch mm mm mil mm bar psi 16 5/8 16,1 16,30 4 0,100 0,5 7,2 16,35 5 0,125 0,6 8,7 16,40 6 0,150 0,7 10,1 16,45 7 0,175 0,8 11,6 16,50 8 0,200 1,0 14,5 16,60 10 0,250 1,0 14,5 16,70 12 0,300 1,0 14,5 16,90 15 0,400 1,0 14,5 22 7/8 22,3 22,60 6 0,150 0,5 7,2 22,65 7 0,177 0,6 8,7 22,70 8 0,200 0,7 10,1 22,80 10 0,250 1,0 14,5 22,90 12 0,300 1,0 14,5 23,10 15 0,400 1,0 14,5 25 1 25,1 25,60 10 0,250 0,8 11,6 25,70 12 0,300 0,9 13,0 29 1 1/8 28,6 29,10 10 0,250 0,7 10,1 29,20 12 0,300 0,8 11,6 Dripper flow rate per hour (lph) Pressure in bar Spacing (cm) 10 15 20 30 40 0,30 0,55 - - 1,30 - 0,65 0,70 - - 1,50 - 0,75 0,40 0,55 - - 1,75 - 0,90 0,70 - - 2,00 - 1,00 0,60 0,55 5,40 3,60 2,70 1,80 1,40 0,70 6,00 4,00 3,00 2,00 1,50 0,90 0,55 8,00 5,30 4,00 2,70 2,00 0,70 9,00 6,00 4,50 3,00 2,30 1,20 0,55 10,70 7,10 5,30 3,50 2,70 0,70 12,00 8,00 6,00 4,00 3,00 2,10 0,55 19,00 - 9,50 - - 0,70 21,00 - 10,50 - - Pressione in bar Flow rate in lph * For the fittings and valves go to page 147/151 - 157/161 DRIP IRRIGATION LIGHT DRIPLINE WITH CONTINUOUS LABYRINTH - IRRITECTAPE™ PE pipe characteristics Dripper characteristics IrritecTape ™ is the traditional product whose excellent performance makes it one of the best filtrating driplines. The light dripline with continuous labyrinth ideal in the case of close spacing for open field horticultural crops and flowers. The reduced spacing between the drip points and the low flow-rate make it perfect for very sandy soils. Characteristics and advantages: • Excellent resistance to pressure peaks even in the case of minimum thickness • Excellent tensile strength • The particular design of the labyrinth allows to reach high lengths with maximum uniformity • Excellent uniformity even during fertigation cycles • It is manufactured by a single extrusion process, which avoids welding problems Flow rate conversion table in lph/meter, according to spacing and working pressure Field of application *irritecTapewith a spacing of 10 cm and a flow rate of 0,60 lph requires a filtering of 200 mesh. B2B www.distrijet.ch 0228400045
RkJQdWJsaXNoZXIy NzIyMzg3